Find a Service Center
- 1" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt | 3/8 in |
| Overall Width | 1 49/64 in |
| Bearing Insert | G1100KRRB TDCF |
| Base Height | 15/32 in |
| Length Through Bore | 1.375 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 4 1/8 in |
| Base Width | 1 13/32 in |
| Lubrication | Relubricatable |
| Series | RAK Series |
| Housing Material | Polymer |
| Inch/Metric | Inch |
| Locking Device | Eccentric Locking Collar |
| Collar No. | S1100K |
| Base Length | 5 1/2 in |
| Collar O.D. | 1 1/2 in |
| Static Load Rating [Max] | 1730 lbf |
| Bearing Design | Non-Expansion |
| Dynamic Load Rating | 3550 lbf |
| Seal Type | Contact Seals |
| Housing Construction | 1 Piece |
| Shaft Dia. | 1 in |
| End Type | Open End |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt Hole Length | 13/16 in |
| Bolt Holes | 2 |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 7/16 in |
| Outer Ring Size | 205 |
| Temperature Range [Max] | 250 °F |
| Housing Height | 2 11/16 in |
| Weight | 0.906 LB |
| EAN or UPC | 87796180055 |
-
![HACCP Friendly]()
HACCP Friendly
