Find a Service Center
- 1" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bearing Type | Ball Bearing |
| Static Load Rating [Max] | 1730 lbf |
| Pillow Block Type | Thru-Bolt |
| Bearing Insert | G1100KRRB TDCF |
| Housing Construction | 1 Piece |
| End Type | Open End |
| Housing Height | 2 11/16 in |
| Collar O.D. | 1 1/2 in |
| Series | RAK Series |
| Base Height | 15/32 in |
| Base Length | 5 1/2 in |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Polymer |
| Bolt Hole Width | 7/16 in |
| Outer Ring Size | 205 |
| Dynamic Load Rating | 3550 lbf |
| Shaft Dia. | 1 in |
| Base Width | 1 13/32 in |
| Bolt Hole Spacing | 4 1/8 in |
| Bolt Holes | 2 |
| Overall Width | 1 49/64 in |
| Length Through Bore | 1.375 in |
| Bolt | 3/8 in |
| Collar No. | S1100K |
| Inch/Metric | Inch |
| Temperature Range [Max] | 250 °F |
| Bolt Hole Length | 13/16 in |
| Weight | 0.906 LB |
| EAN or UPC | 87796180055 |
-
![HACCP Friendly]()
HACCP Friendly
