Find a Service Center
- 1.4375" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Length Through Bore | 1.48438 in |
| Housing Height | 3 5/8 in |
| Temperature Range [Max] | 250 °F |
| Base Width | 1 25/32 in |
| Bolt Holes | 2 |
| Outer Ring Size | 207 |
| Bolt Hole Length | 31/32 in |
| Bearing Type | Ball Bearing |
| Bearing Insert | G1107KRRB TDCF |
| Static Load Rating [Max] | 3400 lbf |
| Bolt Hole Width | 9/16 in |
| Base Height | 21/32 in |
| Overall Width | 2 11/64 in |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| End Type | Open End |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Polymer |
| Pillow Block Type | Thru-Bolt |
| Inch/Metric | Inch |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt Hole Spacing | 5 1/8 in |
| Collar No. | S1107K |
| Dynamic Load Rating | 6400 lbf |
| Shaft Dia. | 1.4375 in |
| Bolt | 1/2 in |
| Base Length | 6 9/16 in |
| Series | RAK Series |
| Collar O.D. | 2 1/8 in |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Weight | 1.872 LB |
| EAN or UPC | 87796180109 |
-
![HACCP Friendly]()
HACCP Friendly
