Find a Service Center
- 1.4375" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Inch/Metric | Inch |
| Static Load Rating [Max] | 3400 lbf |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Material | Polymer |
| Base Length | 6 9/16 in |
| Seal Type | Contact Seals |
| Temperature Range [Max] | 250 °F |
| Pillow Block Type | Thru-Bolt |
| Overall Width | 2 11/64 in |
| Bolt Hole Width | 9/16 in |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Lubrication | Relubricatable |
| Housing Construction | 1 Piece |
| Bolt Holes | 2 |
| Outer Ring Size | 207 |
| Shaft Dia. | 1.4375 in |
| Series | RAK Series |
| Base Width | 1 25/32 in |
| Bearing Insert | G1107KRRB TDCF |
| Length Through Bore | 1.48438 in |
| Base Height | 21/32 in |
| Bolt Hole Length | 31/32 in |
| Housing Height | 3 5/8 in |
| Collar No. | S1107K |
| Collar O.D. | 2 1/8 in |
| Bearing Type | Ball Bearing |
| Bolt | 1/2 in |
| Bolt Hole Spacing | 5 1/8 in |
| Locking Device | Eccentric Locking Collar |
| Dynamic Load Rating | 6400 lbf |
| Weight | 1.872 LB |
| EAN or UPC | 87796180109 |
-
![HACCP Friendly]()
HACCP Friendly
