Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
- Material handling
- Dairy and refrigeration
compliances
- 0
| Length Through Bore | 1.4375 in |
| Housing Material | Polymer |
| Overall Width | 1 31/32 in |
| Outer Ring Size | 206 |
| Bolt | 1/2 in |
| Bolt Holes | 2 |
| Base Width | 1 9/16 in |
| Bearing Type | Ball Bearing |
| Base Height | 17/32 in |
| Collar No. | S1103K |
| Housing Construction | 1 Piece |
| Shaft Dia. | 1.1875 in |
| Series | RAK Series |
| Bolt Hole Length | 15/16 in |
| Bearing Insert | G1103KRRB TDCF |
| Inch/Metric | Inch |
| Bolt Hole Spacing | 4 5/8 in |
| Temperature Range [Max] | 250 °F |
| Collar O.D. | 1 47/64 in |
| Seal Type | Contact Seals |
| Housing Height | 3 5/32 in |
| Dynamic Load Rating | 4900 lbf |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 9/16 in |
| Locking Device | Eccentric Locking Collar |
| Base Length | 6 3/16 in |
| Lubrication | Relubricatable |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Static Load Rating [Max] | 2500 lbf |
| Weight | 1.19 LB |
| EAN or UPC | 87796180062 |
-
![HACCP Friendly]()
HACCP Friendly
