Find a Service Center
- 1.1875" Shaft, 1.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
- Material handling
- Dairy and refrigeration
compliances
- 0
| Bolt Hole Width | 9/16 in |
| Base Height | 17/32 in |
| Series | RAK Series |
| Bolt Hole Spacing | 4 5/8 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| End Type | Open End |
| Collar O.D. | 1 47/64 in |
| Static Load Rating [Max] | 2500 lbf |
| Housing Height | 3 5/32 in |
| Outer Ring Size | 206 |
| Temperature Range [Max] | 250 °F |
| Dynamic Load Rating | 4900 lbf |
| Base Width | 1 9/16 in |
| Lubrication | Relubricatable |
| Overall Width | 1 31/32 in |
| Pillow Block Type | Thru-Bolt |
| Bolt | 1/2 in |
| Bearing Type | Ball Bearing |
| Base Length | 6 3/16 in |
| Seal Type | Contact Seals |
| Length Through Bore | 1.4375 in |
| Inch/Metric | Inch |
| Housing Construction | 1 Piece |
| Bearing Design | Non-Expansion |
| Locking Device | Eccentric Locking Collar |
| Shaft Dia. | 1.1875 in |
| Bolt Holes | 2 |
| Collar No. | S1103K |
| Housing Material | Polymer |
| Bearing Insert | G1103KRRB TDCF |
| Bolt Hole Length | 15/16 in |
| Weight | 1.19 LB |
| EAN or UPC | 87796180062 |
-
![HACCP Friendly]()
HACCP Friendly
