Find a Service Center
- 1.25" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Housing Height | 3 5/8 in |
| Inch/Metric | Inch |
| Bolt | 1/2 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Temperature Range [Max] | 250 °F |
| Bolt Hole Length | 31/32 in |
| Collar O.D. | 2 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 9/16 in |
| Outer Ring Size | 207 |
| Bolt Hole Spacing | 5 1/8 in |
| Housing Construction | 1 Piece |
| Static Load Rating [Max] | 3400 lbf |
| Shaft Dia. | 1.25 in |
| Overall Width | 2 11/64 in |
| Housing Material | Polymer |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Locking Device | Eccentric Locking Collar |
| Base Length | 6 9/16 in |
| Bolt Holes | 2 |
| Base Height | 21/32 in |
| End Type | Open End |
| Base Width | 1 25/32 in |
| Bearing Type | Ball Bearing |
| Bearing Insert | G1104KRRB TDCF |
| Series | RAK Series |
| Length Through Bore | 1.48438 in |
| Collar No. | S1104K |
| Dynamic Load Rating | 6400 lbf |
| Weight | 2.606 LB |
| EAN or UPC | 87796180086 |
-
![HACCP Friendly]()
HACCP Friendly
