- 1.25" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Base Height | 21/32 in |
| Bolt Hole Width | 9/16 in |
| Bearing Insert | G1104KRRB TDCF |
| Bolt | 1/2 in |
| Series | RAK Series |
| Base Width | 1 25/32 in |
| Inch/Metric | Inch |
| Overall Width | 2 11/64 in |
| Housing Construction | 1 Piece |
| Static Load Rating [Max] | 3400 lbf |
| Collar No. | S1104K |
| Base Length | 6 9/16 in |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Housing Height | 3 5/8 in |
| Bearing Type | Ball Bearing |
| Collar O.D. | 2 1/8 in |
| Pillow Block Type | Thru-Bolt |
| End Type | Open End |
| Dynamic Load Rating | 6400 lbf |
| Temperature Range [Max] | 250 °F |
| Housing Material | Polymer |
| Bolt Holes | 2 |
| Length Through Bore | 1.48438 in |
| Locking Device | Eccentric Locking Collar |
| Outer Ring Size | 207 |
| Bolt Hole Spacing | 5 1/8 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Shaft Dia. | 1.25 in |
| Bolt Hole Length | 31/32 in |
| Seal Type | Contact Seals |
| Weight | 2.606 LB |
| EAN or UPC | 87796180086 |
-
HACCP Friendly


