Find a Service Center
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Length | 1 1/32 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Dynamic Load Rating | 8150 lbf |
| Bolt Hole Width | 9/16 in |
| Overall Width | 2 5/16 in |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Bearing Insert | G1108KRRB TDCF |
| Collar O.D. | 2 3/8 in |
| Length Through Bore | 1.6875 in |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Outer Ring Size | 208 |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Base Width | 1 7/8 in |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| Temperature Range [Max] | 250 °F |
| Housing Height | 3 15/16 in |
| Collar No. | S1108KT |
| Base Height | 3/4 in |
| Shaft Dia. | 1.5 in |
| Bolt | 1/2 in |
| Bearing Design | Non-Expansion |
| Series | RAK Series |
| Static Load Rating [Max] | 4400 lbf |
| Base Length | 7 1/16 in |
| Bolt Hole Spacing | 5 3/8 in |
| Housing Material | Polymer |
| End Type | Open End |
| Weight | 2.666 LB |
| EAN or UPC | 87796180116 |
-
![HACCP Friendly]()
HACCP Friendly
