Find a Service Center
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Outer Ring Size | 208 |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Bolt Hole Width | 9/16 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Dynamic Load Rating | 8150 lbf |
| Inch/Metric | Inch |
| Housing Height | 3 15/16 in |
| Pillow Block Type | Thru-Bolt |
| Base Height | 3/4 in |
| Bolt Hole Length | 1 1/32 in |
| Base Width | 1 7/8 in |
| Bolt Hole Spacing | 5 3/8 in |
| Collar No. | S1108KT |
| Bolt | 1/2 in |
| Housing Construction | 1 Piece |
| Series | RAK Series |
| Overall Width | 2 5/16 in |
| Seal Type | Contact Seals |
| Collar O.D. | 2 3/8 in |
| Static Load Rating [Max] | 4400 lbf |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Polymer |
| Shaft Dia. | 1.5 in |
| Lubrication | Relubricatable |
| Temperature Range [Max] | 250 °F |
| Base Length | 7 1/16 in |
| Length Through Bore | 1.6875 in |
| Bearing Insert | G1108KRRB TDCF |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Weight | 2.666 LB |
| EAN or UPC | 87796180116 |
-
![HACCP Friendly]()
HACCP Friendly
