Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Height | 1 1/2 in |
| Bolt Hole Width | 1 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 11 1/4 in |
| Seal Type | Labyrinth Seals |
| Inch/Metric | Inch |
| Bearing Insert | GN207KRRB |
| Base Width | 4 in |
| End Type | Open End |
| Series | LSAO Series |
| Lubrication | Relubricatable |
| Overall Width | 4 in |
| Base Length | 13 3/4 in |
| Insert Type | Steel Insert |
| Housing Height | 7 1/32 in |
| Housing Width | 6 7/16 in |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Length Through Bore | 3.125 in |
| Locking Device | Eccentric Locking Collar |
| Temperature Range [Max] | 350 °F |
| Bolt Size | 3/4 in |
| Shaft Dia. | 2.4375 in |
| Collar O.D. | 3 1/2 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Length | 7/8 in |
| Collar No. | SN207K |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Design | Non-Expansion |
| Weight | 28.508 LB |
| EAN or UPC | 87796061569 |
