Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Shaft Dia. | 2.4375 in |
| Bolt Holes | 2 |
| Length Through Bore | 3.125 in |
| Bearing Insert | GN207KRRB |
| Collar O.D. | 3 1/2 in |
| Bolt Hole Length | 7/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Temperature Range [Max] | 350 °F |
| Locking Device | Eccentric Locking Collar |
| Base Width | 4 in |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch |
| Base Length | 13 3/4 in |
| Housing Material | Cast Iron |
| Series | LSAO Series |
| Lubrication | Relubricatable |
| Collar No. | SN207K |
| Bolt Size | 3/4 in |
| Seal Type | Labyrinth Seals |
| Pillow Block Type | Thru-Bolt |
| Base Height | 1 1/2 in |
| Insert Type | Steel Insert |
| Bearing Design | Non-Expansion |
| Overall Width | 4 in |
| Housing Width | 6 7/16 in |
| Bearing Type | Ball Bearing |
| Bolt Hole Spacing | 11 1/4 in |
| Bolt Hole Width | 1 3/8 in |
| Housing Height | 7 1/32 in |
| Weight | 28.508 LB |
| EAN or UPC | 87796061569 |
