Find a Service Center
- 2.6875" Shaft, 4.5625" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Size | 7/8 in |
| End Type | Open End |
| Locking Device | Eccentric Locking Collar |
| Bearing Type | Ball Bearing |
| Seal Type | Labyrinth Seals |
| Base Height | 1 3/4 in |
| Shaft Dia. | 2.6875 in |
| Lubrication | Relubricatable |
| Housing Width | 7 7/16 in |
| Housing Height | 8 9/32 in |
| Series | LSAO Series |
| Bolt Hole Spacing | 12 in |
| Collar No. | SO211K |
| Bolt Holes | 2 |
| Collar O.D. | 4 in |
| Base Length | 15 3/8 in |
| Bearing Design | Non-Expansion |
| Insert Type | Steel Insert |
| Housing Material | Cast Iron |
| Temperature Range [Max] | 350 °F |
| Length Through Bore | 3.5 in |
| Bolt Hole Width | 1 3/8 in |
| Base Width | 4 3/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Overall Width | 4 3/8 in |
| Bolt Hole Length | 1 in |
| Bearing Insert | GN211KRRB |
| Pillow Block Type | Thru-Bolt |
| Inch/Metric | Inch |
| Housing Construction | 1 Piece |
| Weight | 43.67 LB |
| EAN or UPC | 87796061750 |
