Find a Service Center
- 2.6875" Shaft, 4.5625" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Design | Non-Expansion |
| Bolt Hole Spacing | 12 in |
| Inch/Metric | Inch |
| Insert Type | Steel Insert |
| Shaft Dia. | 2.6875 in |
| Temperature Range [Max] | 350 °F |
| Housing Construction | 1 Piece |
| Series | LSAO Series |
| Base Height | 1 3/4 in |
| Bolt Hole Width | 1 3/8 in |
| Housing Width | 7 7/16 in |
| Length Through Bore | 3.5 in |
| Bolt Size | 7/8 in |
| Collar O.D. | 4 in |
| Housing Height | 8 9/32 in |
| Base Length | 15 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| End Type | Open End |
| Collar No. | SO211K |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | GN211KRRB |
| Bolt Hole Length | 1 in |
| Bearing Type | Ball Bearing |
| Seal Type | Labyrinth Seals |
| Mounted Unit Duty | Heavy-Duty |
| Housing Material | Cast Iron |
| Overall Width | 4 3/8 in |
| Bolt Holes | 2 |
| Base Width | 4 3/8 in |
| Weight | 43.67 LB |
| EAN or UPC | 87796061750 |
