Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. | 0.875 in |
| Preload Level | None |
| icNumber | 7700552 |
| Inch/Metric | Inch Bore |
| Width | 9/32 in |
| Seal Type | Non-Contact Seals |
| Radial Internal Clearance | C3 |
| Cage Material | Steel |
| Enclosure | Double Shielded |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Inner Ring Width | 9/32 in |
| Precision | Standard |
| Seal Material | Metal |
| Temperature Range [Max] | 275 °F |
| Dynamic Load Rating | 830 lbf |
| Material | Stainless Steel |
| Lubricant | Polyurea Base |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bearing Type | Radial |
| I.D. | 3/8 in |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Rows of Balls | Single |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Fillet Radius | 0.016 in |
| Static Load Rating [Max] | 312 lbf |
| Temperature Range [Min] | -30 °F |
| Outer Ring Width | 9/32 in |
| No. in Set | Single Bearing |
| Weight | 0.03 LB |
| EAN or UPC | 87796074064 |
| NSN Number | 3110-00-141-9783, 3110-00-249-0636 |
