Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Contact Angle | 0° |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 312 lbf |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Outer Ring Width | 9/32 in |
| Dynamic Load Rating | 830 lbf |
| Fillet Radius | 0.016 in |
| Snap Ring | No Snap Ring |
| Temperature Range [Max] | 275 °F |
| Inner Ring Width | 9/32 in |
| Cage Material | Steel |
| Material | Stainless Steel |
| Inch/Metric | Inch Bore |
| Origin | Single Row Radial |
| Seal Material | Metal |
| Precision | Standard |
| O.D. | 0.875 in |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Enclosure | Double Shielded |
| Temperature Range [Min] | -30 °F |
| I.D. | 3/8 in |
| Seal Type | Non-Contact Seals |
| Radial Internal Clearance | C3 |
| Width | 9/32 in |
| No. in Set | Single Bearing |
| Bore Type | Round Bore |
| Bearing Type | Radial |
| Cage Type | Metal |
| Ball Material | Steel |
| Lubricant | Polyurea Base |
| icNumber | 7700552 |
| Weight | 0.03 LB |
| EAN or UPC | 87796074064 |
| NSN Number | 3110-00-141-9783, 3110-00-249-0636 |
