Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 312 lbf |
| Rows of Balls | Single |
| Radial Internal Clearance | C3 |
| Seal Material | None |
| Inner Ring Width | 0.2188 in |
| O.D. Type | Straight |
| Dynamic Load Rating | 830 lbf |
| Lubricant | Oil Preservative |
| No. in Set | Single Bearing |
| Locking Device | No Locking Device |
| icNumber | 7703304 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Contact Angle | 0° |
| Width | 7/32 in |
| Cage Material | Steel |
| Pre Lubricant | None |
| Bearing Type | Radial |
| Precision | Standard |
| Material | Stainless Steel |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Snap Ring | No Snap Ring |
| O.D. | 0.875 in |
| Ball Material | Steel |
| Bore Type | Round Bore |
| Capacity | Standard Capacity |
| Fillet Radius | 0.016 in |
| Enclosure | Open |
| I.D. | 3/8 in |
| Inch/Metric | Inch Bore |
| Preload Level | None |
| Outer Ring Width | 7/32 in |
| Seal Type | Unsealed |
| Weight | 0.17 LB |
| EAN or UPC | 87796044197 |
| NSN Number | 3110-00-227-2544 |
