Find a Service Center
- Single Row Radial Bearing (Stainless), 0.375" ID x 0.875" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bearing Type | Radial |
| Enclosure | Open |
| Preload Level | None |
| Snap Ring | No Snap Ring |
| I.D. | 3/8 in |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Inner Ring Width | 0.2188 in |
| Radial Internal Clearance | C3 |
| Cage Type | Metal |
| O.D. | 0.875 in |
| Ball Material | Steel |
| Fillet Radius | 0.016 in |
| Precision | Standard |
| Width | 7/32 in |
| Capacity | Standard Capacity |
| Pre Lubricant | None |
| O.D. Type | Straight |
| icNumber | 7703304 |
| Outer Ring Width | 7/32 in |
| Bore Type | Round Bore |
| Material | Stainless Steel |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 312 lbf |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Material | Steel |
| Seal Material | None |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Oil Preservative |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 830 lbf |
| Seal Type | Unsealed |
| Locking Device | No Locking Device |
| Weight | 0.17 LB |
| EAN or UPC | 87796044197 |
| NSN Number | 3110-00-227-2544 |
