Find a Service Center
- Single Row Radial Bearing (Stainless), 0.25" ID x 0.75" OD x 0.196" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Preload Level | None |
| Pre Lubricant | None |
| Inner Ring Width | 0.196 in |
| Precision | Standard |
| Lubricant | Oil Preservative |
| O.D. | 0.75 in |
| I.D. | 1/4 in |
| Enclosure | Open |
| Seal Material | None |
| Bore Type | Round Bore |
| O.D. Type | Straight |
| Width | 0.196 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 125 lbf |
| icNumber | 7703277 |
| Capacity | Standard Capacity |
| Cage Material | Steel |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Material | Stainless Steel |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Seal Type | Unsealed |
| Cage Type | Metal |
| Fillet Radius | 0.012 in |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 0.196 in |
| Weight | 0.16 LB |
| EAN or UPC | 87796074019 |
| NSN Number | 3110-00-277-0843 |
