Find a Service Center
- Single Row Radial Bearing (Stainless), 0.25" ID x 0.75" OD x 0.196" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Width | 0.196 in |
| Rows of Balls | Single |
| icNumber | 7703277 |
| Precision | Standard |
| Outer Ring Width | 0.196 in |
| Snap Ring | No Snap Ring |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Bore Type | Round Bore |
| I.D. | 1/4 in |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| O.D. | 0.75 in |
| Material | Stainless Steel |
| Pre Lubricant | None |
| Lubricant | Oil Preservative |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Bearing Type | Radial |
| No. in Set | Single Bearing |
| Origin | Single Row Radial |
| Fillet Radius | 0.012 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Preload Level | None |
| Seal Type | Unsealed |
| Static Load Rating [Max] | 125 lbf |
| O.D. Type | Straight |
| Contact Angle | 0° |
| Inner Ring Width | 0.196 in |
| Seal Material | None |
| Cage Type | Metal |
| Cage Material | Steel |
| Enclosure | Open |
| Weight | 0.16 LB |
| EAN or UPC | 87796074019 |
| NSN Number | 3110-00-277-0843 |
