Find a Service Center
- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Fillet Radius | 0.012 in |
| Inch/Metric | Inch Bore |
| Bore Type | Round Bore |
| Temperature Range [Max] | 275 °F |
| Capacity | Standard Capacity |
| Inner Ring Width | 0.196 in |
| Lubricant | Polyurea Base |
| I.D. | 3/16 in |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Cage Material | Steel |
| Snap Ring | No Snap Ring |
| Seal Type | Non-Contact Seals |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Open Width | 5/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 325.00 lbf |
| Precision | Standard |
| Closed Width | 0.196 in |
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Cage Type | Metal |
| Preload Level | None |
| Temperature Range [Min] | -30 °F |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Outer Ring Width | 0.196 in |
| icNumber | 7696102 |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Width | 0.196 in |
| Origin | Single Row Radial |
| Seal Material | Metal |
| Enclosure | Double Shielded |
| O.D. | 1/2 in |
| Static Load Rating [Max] | 110.00 lbf |
| Weight | 0.022 LB |
| EAN or UPC | 87796044463 |
| NSN Number | 3110-00-208-0055, 3110-00-227-3038, 3110-00-728-0963 |
