Find a Service Center
- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 110.00 lbf |
| Lubricant | Polyurea Base |
| Locking Device | No Locking Device |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Cage Material | Steel |
| Enclosure | Double Shielded |
| Contact Angle | 0° |
| I.D. | 3/16 in |
| Cage Type | Metal |
| Temperature Range [Min] | -30 °F |
| Fillet Radius | 0.012 in |
| O.D. Type | Straight |
| Snap Ring | No Snap Ring |
| Inner Ring Width | 0.196 in |
| Rows of Balls | Single |
| Outer Ring Width | 0.196 in |
| Origin | Single Row Radial |
| Material | Steel |
| Preload Level | None |
| Temperature Range [Max] | 275 °F |
| Closed Width | 0.196 in |
| Seal Material | Metal |
| Capacity | Standard Capacity |
| Seal Type | Non-Contact Seals |
| Dynamic Load Rating | 325.00 lbf |
| O.D. | 1/2 in |
| icNumber | 7696102 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| Open Width | 5/32 in |
| Width | 0.196 in |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Bearing Type | Radial |
| Weight | 0.022 LB |
| EAN or UPC | 87796044463 |
| NSN Number | 3110-00-208-0055, 3110-00-227-3038, 3110-00-728-0963 |
