Find a Service Center
- Single Row Radial Bearing, 0.125" ID x 0.375" OD x 0.156" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Inner Ring Width | 5/32 in |
| No. in Set | Single Bearing |
| Precision Level | Standard (ABEC 1) |
| Inch/Metric | Inch Bore |
| Cage Material | Steel |
| Seal Type | Unsealed |
| Fillet Radius | 0.012 in |
| Origin | Single Row Radial |
| Open Width | 5/32 in |
| Lubricant | Oil Preservative |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Dynamic Load Rating | 160.00 lbf |
| Precision | Standard |
| Static Load Rating [Max] | 48.00 lbf |
| Width | 5/32 in |
| Contact Angle | 0° |
| Pre Lubricant | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closed Width | 5/32 in |
| Preload Level | None |
| icNumber | 7696400 |
| Cage Type | Metal |
| Bearing Type | Radial |
| Locking Device | No Locking Device |
| Enclosure | Open |
| O.D. | 3/8 in |
| Outer Ring Width | 5/32 in |
| Ball Material | Steel |
| Material | Steel |
| Rows of Balls | Single |
| Bore Type | Round Bore |
| I.D. | 1/8 in |
| Seal Material | None |
| Radial Internal Clearance | C3 |
| O.D. Type | Straight |
| Weight | 0.16 LB |
| EAN or UPC | 87796044401 |
| NSN Number | 3110-00-618-9494 |
