Find a Service Center
- Single Row Radial Bearing, 0.125" ID x 0.375" OD x 0.156" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| Pre Lubricant | None |
| Radial Internal Clearance | C3 |
| O.D. | 3/8 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 160.00 lbf |
| Preload Level | None |
| Outer Ring Width | 5/32 in |
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 48.00 lbf |
| icNumber | 7696400 |
| Inner Ring Width | 5/32 in |
| Width | 5/32 in |
| Cage Material | Steel |
| Seal Material | None |
| O.D. Type | Straight |
| Contact Angle | 0° |
| Origin | Single Row Radial |
| Inch/Metric | Inch Bore |
| Enclosure | Open |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Fillet Radius | 0.012 in |
| Cage Type | Metal |
| Lubricant | Oil Preservative |
| I.D. | 1/8 in |
| Seal Type | Unsealed |
| Closed Width | 5/32 in |
| Snap Ring | No Snap Ring |
| Open Width | 5/32 in |
| Precision | Standard |
| No. in Set | Single Bearing |
| Ball Material | Steel |
| Bore Type | Round Bore |
| Weight | 0.16 LB |
| EAN or UPC | 87796044401 |
| NSN Number | 3110-00-618-9494 |
