Find a Service Center
- Single Row Radial Bearing, 45 mm ID x 85 mm OD x 27 mm Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- The 200 series R-Seal type consists of deep groove, Conrad type bearings which incorporate a flare-out, contact R Seal.In this design a synthetic rubber impregnated washer is enclosed between two metal shields to give unsurpassed protection against contaminiants. Because of the heavy contact seal, this series is normally employed in moderate speed service.
| Contact Angle | 0° |
| Radial Internal Clearance | C3 |
| Material | Steel |
| Locking Device | No Locking Device |
| Lubricant | Polyurea Base |
| Temperature Range [Max] | 275 °F |
| Snap Ring | No Snap Ring |
| Cage Type | Metal |
| Fillet Radius | 0.039 in |
| O.D. | 85 mm |
| Preload Level | None |
| Static Load Rating [Max] | 4550 lbf |
| Bore Type | Round Bore |
| Outer Ring Width | 21 mm |
| Temperature Range [Min] | -30 °F |
| Dynamic Load Rating | 8300 lbf |
| Enclosure | Double Sealed |
| Cage Material | Steel |
| Rows of Balls | Single |
| Bearing Type | Radial |
| Ball Material | Steel |
| Seal Type | Contact Seals |
| Precision | Standard |
| Inner Ring O.D. | 2.279 in |
| Seal Material | Rubber |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Seal O.D. | 2.851 mm |
| Inner Ring Width | 27 mm |
| Origin | Wide Inner Ring |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| icNumber | 7701308 |
| Seal Protection Width | 0.952 in |
| I.D. | 45 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Metric Bore |
| Weight | 1.036 LB |
| EAN or UPC | 87796041530 |
