Find a Service Center
- Single Row Radial Bearing, 45 mm ID x 85 mm OD x 27 mm Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- The 200 series R-Seal type consists of deep groove, Conrad type bearings which incorporate a flare-out, contact R Seal.In this design a synthetic rubber impregnated washer is enclosed between two metal shields to give unsurpassed protection against contaminiants. Because of the heavy contact seal, this series is normally employed in moderate speed service.
| Lubricant | Polyurea Base |
| Fillet Radius | 0.039 in |
| Seal Protection Width | 0.952 in |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Temperature Range [Max] | 275 °F |
| Inch/Metric | Metric Bore |
| Ball Material | Steel |
| Static Load Rating [Max] | 4550 lbf |
| Precision Level | Standard (ABEC 1) |
| Cage Type | Metal |
| Seal Type | Contact Seals |
| Dynamic Load Rating | 8300 lbf |
| Radial Internal Clearance | C3 |
| Cage Material | Steel |
| Rows of Balls | Single |
| Preload Level | None |
| Precision | Standard |
| Material | Steel |
| icNumber | 7701308 |
| O.D. Type | Straight |
| Seal O.D. | 2.851 mm |
| Enclosure | Double Sealed |
| Snap Ring | No Snap Ring |
| O.D. | 85 mm |
| Outer Ring Width | 21 mm |
| Temperature Range [Min] | -30 °F |
| Bore Type | Round Bore |
| Inner Ring Width | 27 mm |
| I.D. | 45 mm |
| Origin | Wide Inner Ring |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | Rubber |
| Bearing Type | Radial |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Inner Ring O.D. | 2.279 in |
| Weight | 1.036 LB |
| EAN or UPC | 87796041530 |
