Find a Service Center
- Wide Inner Ring Bearing, 1" ID x 2.44094" OD x 0.945" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| No. in Set | Single Bearing |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Ball Material | Steel |
| Temperature Range [Min] | -30 °F |
| Outer Ring Width | 16 mm |
| Capacity | Standard Capacity |
| Seal Material | Rubber |
| Static Load Rating [Max] | 2280 lbf |
| O.D. | 2.44094 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Material | Steel |
| I.D. | 1 in |
| Fillet Radius | 0.039 in |
| Seal Type | Contact Seals |
| Snap Ring | No Snap Ring |
| Origin | Wide Inner Ring |
| Preload Level | None |
| Bore Type | Hex Bore |
| Contact Angle | 0° |
| Inner Ring Width | 0.945 in |
| Dynamic Load Rating | 4800 lbf |
| No. of Balls | 9 |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| icNumber | 7701286 |
| Locking Device | No Locking Device |
| Ball Dia. | 3/8 in |
| Precision | Standard |
| Temperature Range [Max] | 275 °F |
| Cage Type | Metal |
| Enclosure | Double Sealed |
| O.D. Type | Straight |
| Inch/Metric | Inch Bore |
| Weight | 0.67 LB |
| EAN or UPC | 87796040625 |
