Find a Service Center
- Wide Inner Ring Bearing, 1" ID x 2.44094" OD x 0.945" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Dynamic Load Rating | 4800 lbf |
| No. in Set | Single Bearing |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Double Sealed |
| Fillet Radius | 0.039 in |
| Inner Ring Width | 0.945 in |
| Ball Dia. | 3/8 in |
| Inch/Metric | Inch Bore |
| O.D. | 2.44094 in |
| Ball Material | Steel |
| Static Load Rating [Max] | 2280 lbf |
| No. of Balls | 9 |
| icNumber | 7701286 |
| Outer Ring Width | 16 mm |
| Snap Ring | No Snap Ring |
| Origin | Wide Inner Ring |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 1 in |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Rows of Balls | Single |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| Capacity | Standard Capacity |
| Material | Steel |
| Bore Type | Hex Bore |
| Seal Material | Rubber |
| Seal Type | Contact Seals |
| Cage Material | Steel |
| Temperature Range [Max] | 275 °F |
| Cage Type | Metal |
| Precision | Standard |
| Weight | 0.67 LB |
| EAN or UPC | 87796040625 |
