Find a Service Center
- Single Row Radial Bearing, 0.876" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| No. of Balls | 9 |
| Seal Type | Contact Seals |
| Cage Type | Metal |
| Inner Ring Width | 1 in |
| Outer Ring Width | 0.591 in |
| Material | Steel |
| Ball Material | Steel |
| O.D. | 2.04724 in |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Dia. | 0.313 in |
| Radial Internal Clearance | C3 |
| Cage Material | Steel |
| Seal Material | Rubber |
| Inch/Metric | Inch Bore |
| O.D. Type | Spherical |
| Dynamic Load Rating | 3450 lbf |
| Temperature Range [Min] | -30 °F |
| Static Load Rating [Max] | 1560 lbf |
| Bore Type | Hex Bore |
| Lubricant | Polyurea Base |
| Enclosure | Double Sealed |
| Capacity | Standard Capacity |
| Temperature Range [Max] | 275 °F |
| I.D. | 7/8 in |
| Precision | Standard |
| Origin | Wide Inner Ring |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Rows of Balls | Single |
| Weight | 0.441 LB |
| EAN or UPC | 87796045972 |
