Find a Service Center
- Single Row Radial Bearing, 0.876" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Outer Ring Width | 0.591 in |
| Inch/Metric | Inch Bore |
| Rows of Balls | Single |
| No. of Balls | 9 |
| Origin | Wide Inner Ring |
| Temperature Range [Max] | 275 °F |
| Contact Angle | 0° |
| Cage Material | Steel |
| O.D. Type | Spherical |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Dynamic Load Rating | 3450 lbf |
| Capacity | Standard Capacity |
| Ball Dia. | 0.313 in |
| Enclosure | Double Sealed |
| Inner Ring Width | 1 in |
| Seal Type | Contact Seals |
| Bearing Type | Radial |
| Seal Material | Rubber |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Hex Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Type | Metal |
| No. in Set | Single Bearing |
| O.D. | 2.04724 in |
| Ball Material | Steel |
| Precision | Standard |
| Static Load Rating [Max] | 1560 lbf |
| Material | Steel |
| Snap Ring | No Snap Ring |
| I.D. | 7/8 in |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| Weight | 0.441 LB |
| EAN or UPC | 87796045972 |
