Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Cage Type | Metal |
| Seal Type | Contact Seals |
| Bore Type | Hex Bore |
| Seal Material | Rubber |
| O.D. | 2.04724 in |
| Contact Angle | 0° |
| Temperature Range [Min] | -30 °F |
| Capacity | Standard Capacity |
| Ball Dia. | 0.313 in |
| No. of Balls | 9 |
| Dynamic Load Rating | 3450 lbf |
| Origin | Wide Inner Ring |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 1560 lbf |
| No. in Set | Single Bearing |
| Enclosure | Double Sealed |
| Lubricant | Polyurea Base |
| Snap Ring | No Snap Ring |
| Material | Steel |
| Radial Internal Clearance | C3 |
| Temperature Range [Max] | 275 °F |
| Outer Ring Width | 0.591 in |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| Precision | Standard |
| Inner Ring Width | 1 in |
| Cage Material | Steel |
| Preload Level | None |
| O.D. Type | Straight |
| Bearing Type | Radial |
| Locking Device | No Locking Device |
| I.D. | 7/8 in |
| Weight | 0.41 LB |
| EAN or UPC | 87796045965 |
