Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 2.04724" OD x 1" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
| Inch/Metric | Inch Bore |
| Cage Material | Steel |
| I.D. | 7/8 in |
| O.D. Type | Straight |
| Origin | Wide Inner Ring |
| Capacity | Standard Capacity |
| Contact Angle | 0° |
| O.D. | 2.04724 in |
| Bore Type | Hex Bore |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Contact Seals |
| Enclosure | Double Sealed |
| Temperature Range [Max] | 275 °F |
| Bearing Type | Radial |
| No. in Set | Single Bearing |
| Material | Steel |
| Preload Level | None |
| Seal Material | Rubber |
| Outer Ring Width | 0.591 in |
| Cage Type | Metal |
| Lubricant | Polyurea Base |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| Ball Material | Steel |
| Temperature Range [Min] | -30 °F |
| Inner Ring Width | 1 in |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 3450 lbf |
| Static Load Rating [Max] | 1560 lbf |
| Locking Device | No Locking Device |
| Ball Dia. | 0.313 in |
| No. of Balls | 9 |
| Rows of Balls | Single |
| Snap Ring | No Snap Ring |
| Weight | 0.41 LB |
| EAN or UPC | 87796045965 |
