Find a Service Center
- Single Row Radial Bearing, 0.5625" ID x 0.394" OD x 0.511811" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Type | Contact Seals |
| Inner Ring Width | 13 mm |
| Capacity | Standard Capacity |
| Lubricant | Polyurea Base |
| Enclosure | Double Sealed |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Temperature Range [Min] | -30 °F |
| No. in Set | Single Bearing |
| Locking Device | No Locking Device |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Temperature Range [Max] | 275 °F |
| Radial Internal Clearance | C3 |
| Bore Type | Hex Bore |
| Origin | Single Row Radial |
| Precision | Standard |
| Outer Ring Width | 11 mm |
| Cage Type | Metal |
| O.D. Type | Straight |
| Cage Material | Steel |
| Dynamic Load Rating | 2360 lbf |
| Ball Material | Steel |
| Rows of Balls | Single |
| Preload Level | None |
| O.D. | 1.37795 in |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1000 lbf |
| Snap Ring | No Snap Ring |
| Seal Material | Rubber |
| icNumber | 7700814 |
| Contact Angle | 0° |
| I.D. | 9/16 in |
| Material | Steel |
| Weight | 0.25 LB |
| EAN or UPC | 87796083363 |
