Find a Service Center
- Single Row Radial Bearing, 0.5625" ID x 0.394" OD x 0.511811" Wide, Hex Bore, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Type | Metal |
| Temperature Range [Min] | -30 °F |
| Material | Steel |
| Lubricant | Polyurea Base |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Dynamic Load Rating | 2360 lbf |
| icNumber | 7700814 |
| Seal Material | Rubber |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Cage Material | Steel |
| O.D. Type | Straight |
| Outer Ring Width | 11 mm |
| Preload Level | None |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bearing Type | Radial |
| Temperature Range [Max] | 275 °F |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| Seal Type | Contact Seals |
| Radial Internal Clearance | C3 |
| Rows of Balls | Single |
| Precision | Standard |
| Precision Level | Standard (ABEC 1) |
| I.D. | 9/16 in |
| Static Load Rating [Max] | 1000 lbf |
| Inner Ring Width | 13 mm |
| O.D. | 1.37795 in |
| Enclosure | Double Sealed |
| Bore Type | Hex Bore |
| No. in Set | Single Bearing |
| Weight | 0.25 LB |
| EAN or UPC | 87796083363 |
