Find a Service Center
- 5.6" Maximum Diameter
- 6 1/2" Stroke Length
- 4" Compressed Height
- 1/8" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
applications
- Palletizers
- Clutch and brake systems
- Textile looms
- Paper machines
- Commercial laundry machines
- Vibratory conveyors
- Electronic equipment
- Compressors
- Bin-tilting devices
- Conveyor systems
- Lift tables
- Roll tensioning
- Labeling equipment
| Compressed Height | 4 in |
| Blind Tap for Mounting | 1/2-13 UNC x 0.63 Deep |
| Air Inlet Type | NPT |
| Temperature Range [Min] | -40 °F |
| Force @ 6 in Stroke | N/A |
| Stroke Length [Max] | 6 1/2 in |
| Force @ Stroke (80 psi) | 990 lbf @ 1 in, 990 lbf @ 3 in, 990 lbf @ 5 in |
| Pressure [Max] | 100 psi |
| Force @ 5 in Stroke | 1100 lbf |
| End Closure | Style 1 End Retainer |
| Style No. | YI-1S |
| Temperature Range [Max] | 150 °F |
| Recommended Isolator Design Height [Min] | 7 in |
| Air Inlet | 1/8 in |
| Force @ 1 in Stroke | 1000 lbf |
| Lower End Plate Diameter | 5.1 in |
| Force @ 2 in Stroke | 1150 lbf |
| Force @ 4 in Stroke | N/A |
| Force @ 3 in Stroke | 1150 lbf |
| Force @ 8 in Stroke | N/A |
| Recommended Isolator Design Height [Max] | 9 in |
| Upper End Plate Diameter | 5.1 in |
| Bumpers | w/o Bumpers |
| Force @ 9 in Stroke | N/A |
| Bellows Type | Shaped Sleeve |
| Force @ Maximum Stroke (80 psi) | 750 lbf |
| Force @ 12 in Stroke | N/A |
| Weight | 2.6 LB |
