Find a Service Center
Alternate Products
- 8.7" Maximum Diameter
- 3.3" Stroke Length
- 2" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Temperature Range [Min] | -40 °F |
| Blind Tap Spacing | 2 3/4 in |
| Temperature Range [Max] | 150 °F |
| Convolutions | Single |
| Force @ 1 in Stroke | 3300 lbf |
| End Closure | Style 2 End Retainer |
| Force @ 4 in Stroke | N/A |
| Pressure [Max] | 100 psi |
| Recommended Isolator Design Height [Min] | 3 3/4 in |
| Force @ 3 in Stroke | 1600 lbf |
| End Plate Diameter | 5 in |
| Force @ 9 in Stroke | N/A |
| Force @ Maximum Stroke (80 psi) | 1100 lbf |
| Style No. | YI-1B |
| Force @ 6 in Stroke | N/A |
| Stroke Length [Max] | 3.300 in |
| Force @ 8 in Stroke | N/A |
| Recommended Isolator Design Height [Max] | 4 3/4 in |
| Force @ 2 in Stroke | 2650 lbf |
| Force @ 12 in Stroke | N/A |
| Air Inlet | 1/4 in |
| Compressed Height | 2 in |
| Force @ 5 in Stroke | N/A |
| Bellows Type | Single Convolution |
| Bumpers | w/o Bumpers |
| Force @ Stroke (80 psi) | 3450 lbf @ 1 in, 3450 lbf @ 2 in, 2000 lbf @ 3 in |
| Air Inlet Type | NPT |
| Weight | 4.7 LB |
