Find a Service Center
Alternate Products
- 8.7" Maximum Diameter
- 3.3" Stroke Length
- 2" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
| Air Inlet Type | NPT |
| Force @ 1 in Stroke | 3300 lbf |
| Force @ Stroke (80 psi) | 3450 lbf @ 1 in, 3450 lbf @ 2 in, 2000 lbf @ 3 in |
| Force @ 2 in Stroke | 2650 lbf |
| Temperature Range [Max] | 150 °F |
| End Closure | Style 2 End Retainer |
| Recommended Isolator Design Height [Max] | 4 3/4 in |
| Stroke Length [Max] | 3.300 in |
| Force @ Maximum Stroke (80 psi) | 1100 lbf |
| Bellows Type | Single Convolution |
| Style No. | YI-1B |
| Convolutions | Single |
| End Plate Diameter | 5 in |
| Temperature Range [Min] | -40 °F |
| Force @ 3 in Stroke | 1600 lbf |
| Force @ 4 in Stroke | N/A |
| Air Inlet | 1/4 in |
| Pressure [Max] | 100 psi |
| Force @ 9 in Stroke | N/A |
| Force @ 8 in Stroke | N/A |
| Force @ 6 in Stroke | N/A |
| Blind Tap Spacing | 2 3/4 in |
| Compressed Height | 2 in |
| Recommended Isolator Design Height [Min] | 3 3/4 in |
| Bumpers | w/o Bumpers |
| Force @ 12 in Stroke | N/A |
| Force @ 5 in Stroke | N/A |
| Weight | 4.7 LB |
