RAC-304

RAC Series Single-Acting Aluminum Cylinder

Item #100189792

9.09" Retracted Height

+ Show More

Auto Replenish

each One-time purchase

Product Details

Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side loads of up to 10%
Hard coat finish on all surfaces
Steel base plate and saddle for protection against load-induced damage
Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
High strength return spring for rapid cylinder retraction
CR-400 coupler and dustcap included on all models

Specifications

Maximum Operating Pressure	10000 psi
Oil Capacity - Advance	26.99 in3, 442 cm3
Series	RAC
Oil Capacity	26.97 in3
Operating Pressure [Max]	10000 psi, 700 bar
Plunger Diameter	2.36 in, 60 mm
Cylinder Capacity	30 tons
Retracted Height	9.09 in
Single/Double-Acting	Single Acting
Collapsed Height	9.09 in, 231 mm
Outside Dia.	3.94 in
Cylinder Effective Area - Advance	6.85 in2, 44.2 cm2
Cylinder Effective Area	6.85 in2
Material	Aluminum
Saddle Tilt Angle [Max]	5 degrees
Cylinder Class	30 Ton
Extended Height	13.04 in, 331 mm
Base Mounting Holes Thread	M6
Optional Tilt Saddle Diameter	2.17 in
Coupler Used	CR400 Coupler
Plunger Type	Solid
Saddle Diameter	1.61 in, 55 mm
Standard	ASME B-30.1, ISO 10100
Saddle Protrusion From Plunger	0.12 in
O.D.	3.94 in, 100 mm
Base Mounting Holes Bolt Circle	3.15 in, 80 mm
Cylinder Capacity Advance [MAX]	309 kN
Collapsed Height [Max]	9.99 in, 254 mm
Return Type	Single-Acting, Spring Return
Optional Tilt Saddle Addition To Collapsed Height	0.43 in, 11 mm
Base To Advance Port	1.31 in, 32 mm
Cylinder Bore Diameter	2.95 in, 75 mm
Collapsed Height [Min]	5 in, 128 mm
Surface Treatment	Anodized
Stroke	3.94 in, 100 mm
Base Mounting Holes Thread Depth	12 mm
Weight	13.6 LB
EAN or UPC	662005125746