RAC-304

RAC Series Single-Acting Aluminum Cylinder

Item #100189792

9.09" Retracted Height

+ Show More

Auto Replenish

each One-time purchase

Product Details

Composite bearings prevent metal-to-metal contact, increasing cylinder life and resistance to side loads of up to 10%
Hard coat finish on all surfaces
Steel base plate and saddle for protection against load-induced damage
Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
High strength return spring for rapid cylinder retraction
CR-400 coupler and dustcap included on all models

Specifications

Single/Double-Acting	Single Acting
Retracted Height	9.09 in
Cylinder Capacity	30 tons
Collapsed Height	9.09 in, 231 mm
Oil Capacity - Advance	26.99 in3, 442 cm3
Operating Pressure [Max]	10000 psi, 700 bar
Series	RAC
Plunger Diameter	2.36 in, 60 mm
Maximum Operating Pressure	10000 psi
Oil Capacity	26.97 in3
Outside Dia.	3.94 in
Cylinder Effective Area - Advance	6.85 in2, 44.2 cm2
Cylinder Effective Area	6.85 in2
Saddle Protrusion From Plunger	0.12 in
Return Type	Single-Acting, Spring Return
Surface Treatment	Anodized
Material	Aluminum
Optional Tilt Saddle Addition To Collapsed Height	0.43 in, 11 mm
Cylinder Capacity Advance [MAX]	309 kN
Extended Height	13.04 in, 331 mm
Stroke	3.94 in, 100 mm
Collapsed Height [Max]	9.99 in, 254 mm
Cylinder Bore Diameter	2.95 in, 75 mm
Base Mounting Holes Thread Depth	12 mm
Coupler Used	CR400 Coupler
Plunger Type	Solid
Base Mounting Holes Thread	M6
Base Mounting Holes Bolt Circle	3.15 in, 80 mm
Base To Advance Port	1.31 in, 32 mm
O.D.	3.94 in, 100 mm
Saddle Diameter	1.61 in, 55 mm
Saddle Tilt Angle [Max]	5 degrees
Optional Tilt Saddle Diameter	2.17 in
Standard	ASME B-30.1, ISO 10100
Cylinder Class	30 Ton
Collapsed Height [Min]	5 in, 128 mm
Weight	13.6 LB
EAN or UPC	662005125746