
- 7/8" Pitch
- XH Belt Type
- 2" Belt Width
- 30 Teeth
- 8.356" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
Outside Dia. | 8.246 in |
Bushing Series | 3535 |
Type | CF-1 |
No. of Teeth | 30 |
Hub Projection | 0.94 in |
Bore Type | Taper-Lock and QD Bushed |
Hub Dia. | 6 1/2 in |
Finished Bore | N/A |
Length Through Bore | 3.5 in |
Belt Width | 2 in |
Bore Range [Min] | 1.1875 in |
Belt Size | XH |
Bushing Type | Taperlock |
Belt Pitch | 0.875 in |
Bore Range [Max] | 3.5 in |
Pitch Diameter | 8.356 in |
Weight | 30.0 LB |
EAN or UPC | 782475088898 |
