Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 2" Belt Width
- 30 Teeth
- 8.356" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
| Belt Width | 2 in |
| Finished Bore | N/A |
| Bore Range [Min] | 1.1875 in |
| Pitch Diameter | 8.356 in |
| Length Through Bore | 3.5 in |
| Belt Size | XH |
| Bushing Series | 3535 |
| Type | CF-1 |
| Bore Type | Taper-Lock and QD Bushed |
| Outside Dia. | 8.246 in |
| Hub Projection | 0.94 in |
| No. of Teeth | 30 |
| Belt Pitch | 0.875 in |
| Bushing Type | Taperlock |
| Bore Range [Max] | 3.5 in |
| Hub Dia. | 6 1/2 in |
| Weight | 30.0 LB |
| EAN or UPC | 782475088898 |
