Find a Service Center
- 1/2" Pitch
- H Belt Type
- 1" Belt Width
- 30 Teeth
- 4.775" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- If the drive has more than three pulleys, every other pulley should be flanged
- When a drive has three pulleys, at least two should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Belt Pitch | 0.5 in |
| Hub Dia. | N/A |
| Belt Width | 1 in |
| Bushing Series | 2012 |
| No. of Teeth | 30 |
| Type | KF-1 |
| Belt Size | H |
| Bushing Type | Taperlock |
| Bore Range [Min] | 0.5 in |
| Bore Range [Max] | 2 in |
| Finished Bore | N/A |
| Length Through Bore | 1.25 in |
| Hub Projection | 0.06 in |
| Pitch Diameter | 4.775 in |
| Outside Dia. | 4.721 in |
| Bore Type | Taper-Lock and QD Bushed |
| Weight | 5.6 LB |
| EAN or UPC | 782475088409 |
