Find a Service Center
- 1/2" Pitch
- H Belt Type
- 1" Belt Width
- 30 Teeth
- 4.775" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- If the drive has more than three pulleys, every other pulley should be flanged
- When a drive has three pulleys, at least two should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Bore Range [Max] | 2 in |
| Hub Projection | 0.06 in |
| Belt Width | 1 in |
| No. of Teeth | 30 |
| Bushing Type | Taperlock |
| Pitch Diameter | 4.775 in |
| Bore Type | Taper-Lock and QD Bushed |
| Length Through Bore | 1.25 in |
| Bushing Series | 2012 |
| Belt Pitch | 0.5 in |
| Hub Dia. | N/A |
| Belt Size | H |
| Finished Bore | N/A |
| Type | KF-1 |
| Bore Range [Min] | 0.5 in |
| Outside Dia. | 4.721 in |
| Weight | 5.6 LB |
| EAN or UPC | 782475088409 |
