Find a Service Center
- 3/8" Pitch
- L Belt Type
- 1" Belt Width
- 20 Teeth
- 2.387" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Belt Pitch | 0.375 in |
| Finished Bore | N/A |
| Belt Size | L |
| Bore Range [Max] | 1.125 in |
| Hub Dia. | N/A |
| Hub Projection | 0.06 in |
| Pitch Diameter | 2.387 in |
| Belt Width | 1 in |
| Length Through Bore | 0.87 in |
| Bushing Type | Taperlock |
| Outside Dia. | 2.357 in |
| Bushing Series | 1108 |
| Bore Type | Taper-Lock and QD Bushed |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 20 |
| Type | KF-1 |
| Weight | 0.79 LB |
| EAN or UPC | 782475576401 |
