Find a Service Center
- 3/8" Pitch
- L Belt Type
- 1" Belt Width
- 20 Teeth
- 2.387" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Finished Bore | N/A |
| Type | KF-1 |
| Outside Dia. | 2.357 in |
| Bore Type | Taper-Lock and QD Bushed |
| Length Through Bore | 0.87 in |
| Bushing Series | 1108 |
| Bore Range [Max] | 1.125 in |
| Belt Width | 1 in |
| Hub Dia. | N/A |
| Pitch Diameter | 2.387 in |
| Belt Size | L |
| Belt Pitch | 0.375 in |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 20 |
| Bushing Type | Taperlock |
| Hub Projection | 0.06 in |
| Weight | 0.79 LB |
| EAN or UPC | 782475576401 |
