Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 75 mm Shaft
- 3 3/4" Centerline to Base
- 13" Base Length
- 10 5/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
- Mechanical handling
- Conveyors
- Electrical machinery
- Fans
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Static Load Rating [Max] | 35300 lbf |
| Series | 01 Series |
| Pedestal | P 04 |
| Temperature Range [Min] | 32 °F |
| RPM [Max] | 3310 rpm |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 75 mm |
| Bolt Holes | 2 |
| End Type | Open End |
| Base Height | 1 1/2 in |
| Locking Device | Clamping Ring Collar |
| Bearing Type | Split Cylindrical |
| Temperature Range [Max] | 212 °F |
| Housing Material | Cast Iron |
| Bolt Size | 3/4 in |
| Seal Type | Triple Labyrinth Seals |
| Pillow Block Type | Thru-Bolt |
| Base Length | 13 in |
| Inch/Metric | Metric |
| Lubrication | Relubricatable |
| Bolt Hole Spacing Range [Min] | 10 1/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Axial Load | 1710 lbf |
| Insert Type | Split Steel Insert |
| Bolt Hole Spacing Range [Max] | 11 in |
| Base Width | 3 in |
| Housing Construction | 2 Piece |
| Dynamic Load Rating | 29200 lbf |
| Housing Height | 8 1/8 in |
| Bolt Hole Spacing | 10 5/8 in |
| Weight | 32.912 LB |
| EAN or UPC | 7316579346443 |
