Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 75 mm Shaft
- 3 3/4" Centerline to Base
- 13" Base Length
- 10 5/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
- Mechanical handling
- Conveyors
- Electrical machinery
- Fans
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Shaft Dia. | 75 mm |
| Lubrication | Relubricatable |
| Series | 01 Series |
| Base Height | 1 1/2 in |
| Bearing Design | Non-Expansion |
| RPM [Max] | 3310 rpm |
| Static Load Rating [Max] | 35300 lbf |
| Pillow Block Type | Thru-Bolt |
| Housing Material | Cast Iron |
| Temperature Range [Min] | 32 °F |
| End Type | Open End |
| Dynamic Load Rating | 29200 lbf |
| Bolt Hole Spacing Range [Max] | 11 in |
| Housing Height | 8 1/8 in |
| Housing Construction | 2 Piece |
| Base Length | 13 in |
| Insert Type | Split Steel Insert |
| Inch/Metric | Metric |
| Bolt Holes | 2 |
| Temperature Range [Max] | 212 °F |
| Base Width | 3 in |
| Seal Type | Triple Labyrinth Seals |
| Bolt Hole Spacing Range [Min] | 10 1/4 in |
| Axial Load | 1710 lbf |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing | 10 5/8 in |
| Bolt Size | 3/4 in |
| Bearing Type | Split Cylindrical |
| Locking Device | Clamping Ring Collar |
| Pedestal | P 04 |
| Weight | 32.912 LB |
| EAN or UPC | 7316579346443 |
