Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 35 mm Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mounted Unit Duty | Heavy-Duty |
| Bearing Type | Split Cylindrical |
| Series | 01 Series |
| Static Load Rating [Max] | 15100 lbf |
| Insert Type | Split Steel Insert |
| Dynamic Load Rating | 14600 lbf |
| Axial Load | 720 lbf |
| Shaft Dia. | 35 mm |
| Base Width | 2 3/8 in |
| Pedestal | P 01 |
| Housing Height | 5 1/2 in |
| Base Height | 7/8 in |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Bearing Design | Expansion |
| Temperature Range [Min] | 32 °F |
| RPM [Max] | 5400 rpm |
| Seal Type | Triple Labyrinth Seals |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Bolt Size | 1/2 in |
| End Type | Open End |
| Locking Device | Clamping Ring Collar |
| Temperature Range [Max] | 212 °F |
| Bolt Hole Spacing Range [Min] | 6 3/4 in |
| Bolt Hole Spacing | 7 1/8 in |
| Inch/Metric | Metric |
| Base Length | 9 in |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Housing Construction | 2 Piece |
| Weight | 11.858 LB |
| EAN or UPC | 7316577841971 |
