Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 35 mm Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mounted Unit Duty | Heavy-Duty |
| Base Width | 2 3/8 in |
| Pedestal | P 01 |
| Insert Type | Split Steel Insert |
| Base Height | 7/8 in |
| Bolt Hole Spacing | 7 1/8 in |
| Bolt Hole Spacing Range [Min] | 6 3/4 in |
| Axial Load | 720 lbf |
| Inch/Metric | Metric |
| Temperature Range [Max] | 212 °F |
| Bolt Size | 1/2 in |
| Shaft Dia. | 35 mm |
| End Type | Open End |
| Housing Material | Cast Iron |
| Dynamic Load Rating | 14600 lbf |
| Base Length | 9 in |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Static Load Rating [Max] | 15100 lbf |
| Bearing Design | Expansion |
| Seal Type | Triple Labyrinth Seals |
| Series | 01 Series |
| Pillow Block Type | Thru-Bolt |
| Temperature Range [Min] | 32 °F |
| Housing Height | 5 1/2 in |
| RPM [Max] | 5400 rpm |
| Lubrication | Relubricatable |
| Locking Device | Clamping Ring Collar |
| Housing Construction | 2 Piece |
| Bearing Type | Split Cylindrical |
| Bolt Holes | 2 |
| Weight | 11.858 LB |
| EAN or UPC | 7316577841971 |
