Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 1 7/16" Shaft
- 2 3/8" Centerline to Base
- 9" Base Length
- 7 1/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mounted Unit Duty | Heavy-Duty |
| Temperature Range [Min] | 32 °F |
| Bolt Size | 1/2 in |
| Axial Load | 720 lbf |
| Shaft Dia. | 1.4375 in |
| Dynamic Load Rating | 14600 lbf |
| End Type | Open End |
| Bolt Hole Spacing Range [Max] | 7 1/2 in |
| Bolt Hole Spacing Range [Min] | 6 3/4 in |
| Seal Type | Triple Labyrinth Seals |
| Housing Material | Cast Iron |
| Housing Height | 5 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Static Load Rating [Max] | 15100 lbf |
| Series | 01 Series |
| Insert Type | Split Steel Insert |
| Inch/Metric | Inch |
| Base Length | 9 in |
| Housing Construction | 2 Piece |
| Bolt Holes | 2 |
| Base Width | 2 3/8 in |
| RPM [Max] | 5400 rpm |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Pedestal | P 01 |
| Locking Device | Clamping Ring Collar |
| Bearing Type | Split Cylindrical |
| Bolt Hole Spacing | 7 1/8 in |
| Base Height | 7/8 in |
| Temperature Range [Max] | 212 °F |
| Weight | 11.726 LB |
| EAN or UPC | 7316576849510 |
